An analysis of SCR reactor deactivation impact on NOx emissions from a compression ignition engine
 
More details
Hide details
1
BOSMAL Automotive Research & Development Institute Ltd, Bielsko- Biala, Poland.
 
2
Institute of Motor Vehicles and Combustion Engines, Cracow University of Technology.
 
 
Publication date: 2019-07-01
 
 
Combustion Engines 2019,178(3), 208-212
 
KEYWORDS
ABSTRACT
Catalytic exhaust gas aftertreatment devices fitted to combustion engines are susceptible to partial deactivation as their operating time progresses. This includes selective catalytic reduction (SCR) reactors meant for NOx emission control. There are several known deactivation mechanisms of SCR reactors already analyzed in detail in the literature. This paper, however, approaches the analysis of reactor deactivation by comparison of exhaust gas characteristics over repeatable cycle for fresh and aged samples of a SCR reactor for non-road mobile machinery. The research aims to outline which parameters describing the SCR reactor’s performance are most affected by its ageing. In order to do that, fresh and aged samples of the reactor were tested under the Non Road Steady Cycle. The acquired emission results, including concentration traces of particular compounds were analyzed. The specific NOx emission of the aged reactor was significantly higher than that of the fresh one. The NOx conversion efficiency of both reactors was found similar at periods of steady engine operation. It was recognized that during transient conditions the NOx conversion efficiency of the aged reactor was decreased. It was found that the main factor contributing to that phenomenon is the drop in the ammonia storage capacity of the aged SCR sample.
 
REFERENCES (8)
1.
JONHSON, T.V. Diesel emissions in review. SAE Int. J. Engines. 2012, 5, 216-234; DOI: 10.4271/2012-01-0368.
 
2.
NOVA, I., TRONCONI, E. (Eds.) Urea-SCR technology for DeNOx after treatment of diesel exhaust; fundamental and applied catalysis. Springer. Berlin 2014.
 
3.
KRÖCHER, O. Selective catalytic reduction of NOx. Catalysts. 2018, 8, 459. DOI: 10.3390/catal8100459.
 
4.
BRZEŻAŃSKI, M., SALA, R. A study on the indirect urea dosing method in the selective catalytic reduction system. Scientific Conference on Automotive Vehicles and Combustion Engines (KONMOT 2016), Materials Science and Engineering. 2016, 148, 012062 DOI: 10.1088/1757-899X/148/1/012062.
 
5.
SALA, R., KRASOWSKI, J., DZIDA, J. The influence of engine warm up phase on nitrogen oxides emission for heavy-duty Euro VI diesel engine. MATEC Web of Conferences. 2017, 118, 00035, DOI: 10.1051/matecconf/20711800035.
 
6.
MAJEWSKI, W.E. Selective Catalytic Reduction. www.DieselNet.com [access in 03.2019].
 
7.
Regulation (EU) 2016/1628 of the European Parliament and of the Council.
 
8.
Annex V of Regulation (EU) 2016/1628 of the European Parliament and of the Council.
 
 
CITATIONS (2):
1.
The Variation of Functional Characteristics of a Euro VI Selective Catalytic Reduction Reactor after Ageing
Jakub Dzida, Piotr Bielaczyc, Marek Brzeżański
SAE Technical Paper Series
 
2.
Assessment of retrofit devices for the Horizon 2020 Cleanest Engine and Vehicle Retrofit Prizes
Barouch Giechaskiel, Ricardo Suarez-Bertoa, Anastasios Melas, Tommaso Selleri, Maurizio Maggiore
Combustion Engines
 
eISSN:2658-1442
ISSN:2300-9896
Journals System - logo
Scroll to top